B1 QUICK GUIDE EN Smart Wi-Fi Video Doorbell
Compatible with Amazon Alexa
EN EN Thank you for purchasing Laxihub smart home product. Get started using your new devices by downloading Laxihub, one convenient app that manages everything straight from your phone or tablet. Easily connect to your home WiFi and control multiple devices from the touch of your fingertips.
EN EN
EN EN 1 2 3. Download the App 4. Register an account In order to receive notification in time, please click Allow “ ”. Download the Arenti from App Store or Google Play.
EN EN Open the Arenti App. If you are a new user, tap create new account and follow the prompts to complete registration. Note: Please agree with the Privacy Agreement.
EN EN 3 4 5. Pair your device Pair your device Power on your doorbell, you will hear a welcome sound.
EN EN If the status light is red and blinking (once per second). Click to add a new device, and select “Doorbell”. The doorbell is successfully powered on and ready for pairing.
EN EN Pair your device Enter the Wi-Fi password and tap Next to proceed. If needed, you can tap Change WiFi to switch to another suitable WiFi network for your doorbell. Press “Next” to scan QR code using your doorbell. Keep 5~8inches away from your mobile screen.
EN EN Press “Next” after hearing a Pair your device sound from your doorbell. The Arenti App will start to connect to the doorbell automatically as indicated by the status light blinking rapidly and then staying solid blue.
EN EN 7 8 Pair your device Pair your device Once the pairing process is complete, a page showing “Device Found!” will appear. You may choose to edit the device name or assign the device to a dedicated room before tapping Done to finish the pairing process. Once your camera is paired, your camera can be viewed at anytime from your smartphone as long as there is Internet access. If no device is found and the pairing process failed, please check below instructions: 1) WiFi network is 2.4GHz.
EN EN 9 10
EN EN
EN EN 11 12
EN EN Step 2 Fix the bracket on the wall 8. Installation insert the Before choosing your preferred with screws and doorbell into the bracket. Installation location, check the WiFi strength/coverage to ensure AC powered mode Step 1 Remove the bracket from Step 3 Fix the bracket on the wall B1. with screws and insert the doorbell into the bracket. the doorbell is fully functional. Battery powered mode Step 1 Remove the bracket from Step 3 Insert the battery box into B1. the doorbell.
EN EN Side 12~24V ACview
EN 13 EN 14
EN EN Installation Double sided tape mode Step 1 Attach the double sided tape to both sides of the
EN 15 EN 16
EN Trouble shooting How to First reset the device or remove it on the change the Arenti App, then configure the device camera again by the App. network to another router? Why doesn’t It’s recommended to plug SD card after the device power cut. Confirm whether the SD card identify the is normally available and the format is SD card? FAT32.
identified when the Internet environment is not good. Please visit our offici al website for further assistance. www.laxihub.
RF warning statement: To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. © 2020 Laxihub. All rights reserved. All trade names are registered trademarks of respective companies Apple, the Apple logo, iPhone are trademarks of Apple Inc. registered in the U.S. and other countries. Google, the Google logo, Android are trademarks of Google Inc. App Store is a service mark of Apple Inc.
Laxihub Europe Zandsteen 50, 2132 MR Hoofddorp, The Netherlands www.laxihub.
