User Guide

TOOLS REQUIRED:

• Flat head screwdriver

• Phillips head screwdriver

• Drill with 1/16” bit

INSTRUCTIONS:

SStteepp 11

Position joining connector to post

SStteepp 22

Push down to fit brackets on top of post

SStteepp 33

Tighten locking screw using screwdriver

SStteepp 44

Position connector brackets onto post

SStteepp 55

Push down to fit brackets unto post

How to Install A Continuous W

riting

Sur

face

Step 1

Step 2

Step 3

Step 4

Step 5

Step 3

PAGE 1
How to Install A Continuous Writing Surface TOOLS REQUIRED: • Flat head screwdriver • Phillips head screwdriver • Drill with 1/16” bit INSTRUCTIONS: Step 1 Step 1 Position joining connector to post Step 2 Push down to fit brackets on top of post Step 3 Tighten locking screw using screwdriver Step 2 Step 4 Position connector brackets onto post Step 5 Push down to fit brackets unto post Step 3 Step 3 Step 4 Step 5
PAGE 2
How to Install A Continuous Writing Surface TOOLS REQUIRED: • Flat head screwdriver • Phillips head screwdriver • Drill with 1/16” bit INSTRUCTIONS: Step 6 Mark positions for pilot holes to connect joint connector to writing surface Step 6 Step 7 Remove writing surface and drill 1/16” blind pilot holes. Be careful to not drill completely through writing surface top.