By Cassandra Byrd at 8:56 am, Sep 10, 2015 Operators Manual / Manuel D'utilisation 10A - 18" 2-IN-1 Electric Mower ME1018X MNL_ME1018X_V0 Read all safety rules and instructions carefully before operating this tool.
TABLE OF CONTENTS CONTENTS 2 SPECIFICATIONS 2 INTRODUCTION 3 GENERAL SAFETY RULES 3-5 SPECIFIC SAFETY RULES 5-6 SYMBOLS 7-8 ELECTRICAL 9-10 FEATURES 11-12 ASSEMBLY 12-14 OPERATION 15-16 MAINTENANCE 17-20 TROUBLESHOOTING 21 WARRANTY 22 Exploded View / Parts List 23-24 NOTES 25 SPECIFICATIONS Electric Mower ME1018X Voltage 120 V~60Hz Electricity 10 A Motor Speed 3600 r/min Cutting Width 18 inch (460mm) Cutting Height Adjustment 6 Levels (1.5"/38mm - 4"/101.
INTRODUCTION This product has many features for making its use more pleasant and enjoyable.Safety, performance, and dependability have been given top priority in the design of this product making it easy to maintain and operate. GENERAL SAFETY RULES WARNING READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below and on the machine may result in electric shock, fire, and/or serious personal injury.
GENERAL SAFETY RULES < = lenses. They are NOT safety glasses. Following this rule will reduce the risk of eye injury. Use face mask if operation is dusty. > + < #? @JK Q operating this product. Use the right appliance. Do not use the lawn mower for any job except that for which it is intended. Do not force the lawn mower.
GENERAL SAFETY RULES | $ ? \| $?} \ } \ } to be used for the lawn mower. Receptacles are available having built- in GFCI protection and may be used for this measure of safety. ? * ! ! from oil or grease.
SPECIFIC SAFETY RULES % % ] # ! ! before removing the grass catcher or unclogging the chute. The cutting blade continues to rotate for a few seconds after the motor is shut off. Never place any part of the body in the blade area until you are sure the blade has stopped rotating.
SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL V NAME DESIGNATION/EXPLANATION Volts Voltage Alternating Current Type of current A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power hrs Hours Time Class II Construction Double-insulated construction Safety Alert Precaution that LQYROYHV your safety.
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
ELECTRICAL DOUBLE INSULATION Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual three-wire grounded power cord. All exposed metal parts are isolated from the internal metal motor components with protecting insulation. Double insulated tools do not need to be grounded.
ELECTRICAL Total length of cord feet Volts 120V Ampere rating more than 25 50 Ampere rating not more than 100 150 AWG 0-6 18 16 16 14 6 - 10 18 16 14 12 10 - 12 16 16 14 12 12 - 16 14 12 Not Recommended WARNING * + Oumber, tools, or other obstructions while you are working with a power tool. Failure to do so can result in serious personal injury.
FEATURES 4 5 6 1 3 2 10 9 8 7 KNOW YOUR LAWN MOWER The safe use of this product requires an understanding of the information on the product and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. 1) Cord retainer - A convenient cord retainer helps keep the extension cord connection secure during mower operation.
FEATURES K} > K J} ^ + + } # Q} ^ ASSEMBLY KNOW YOUR LAWN MOWER This product requires assembly.
ASSEMBLY WARNING WARNING + ADJUSTING HANDLE + *! +
ASSEMBLY + . Pull up the cover and insert the ! ! + CUTTING HEIGHT POSITIONS Position 1(LOW) LOW HIGH Cut 1.5" ( 38 mm ) 2 2" ( 50.7 mm ) 3 2.5" ( 63.4 mm ) 4 3" ( 76.2 mm ) 5 3.5" ( 88.9 mm ) 6(HIGH) 4" ( 101.6 mm ) SETTING CUTTING HEIGHT When shipped, the wheels on the mower are set to a low-cutting position.
OPERATION WARNING Do not allow familiarity with this type of product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING Always wear safety goggles or safety glasses with side shields when operating this product. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. WARNING Do not use any attachments or accessories not recommended by the manufacturer of this product.
OPERATION MOWING TIPS ^ + ! + ! ! mower blades or motor. Such objects could be accidentally thrown by the mower in any direction and cause serious personal injury to the operator and others. + * ! the cord retainer provided.
MAINTENANCE WARNING When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also wear a dust mask. GENERAL MAINTENANCE Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
MAINTENANCE WARNING Always protect hands by wearing heavy gloves and/or wrapping the cutting edges of the blade with rags and other material when performing blade maintenance. Failure to heed this warning could result in serious personal injury. WARNING Before performing any maintenance, make sure the mower is unplugged from the power supply. Failure to heed this warning could result in serious personal injury. REPLACING THE CUTTING BLADE NOTE: Only use identical replacement blades.
MAINTENANCE SHARPENING THE BLADE For best mowing performance, the mower blade must be kept sharp. A dull blade does not cut grass evenly and overloads the motor. Under normal circumstances, sharpening the blade twice during the mowing season is usually sufficient. However, if your lawn has sandy soil, more frequent sharpenings may be required.
MAINTENANCE STORING THE MOWER mower deck. > $ + ! ! + ! ! ! ! ? ! + ! missing parts.
TROUBLESHOOTING Problem Possible Cause Solution Adjust the height of the handle Carriage bolts not seated properly. and make sure the carriage bolts are seated properly. Handle locks not tightened. Tighten Handle locks. Reconnect the cord and use the cord retainer to keep the cord close to the motor/blade control. Connect the extension cord to a Q <$! @ <$ receptacle. Reset house circuit breaker. If it trips again, call a qualified electrician.
WARRANTY We take pride in producing a high quality, durable product. This Lawnmaster® product carries a limited two (2) year warranty against defects in workmanship and materials from date of purchase under normal household use. If product is to be used for commercial, industrial or rental use, a 30 day limited warranty will apply. Batteries carry a one-year warranty against defects in workmanship and materials.
EXPLODED VIEW MEB1018X Manual EXPLODED VIEW 23
PARTS LIST ME1018X Manual Parts List Key Number Drawing Number Description Quantity 1 GM65BX.A0.01 Motor Cover 1 2 GM65BX.A0.02 Side Discharge Chute Assembly 1 GM65BX.00.04.C3 Discharge Chute 1 2.1 3 TGQTGL.78.00.X1.01 Wheel Assembly 4 3.1 BOC2YX.07.NS Screws 1 3.2 TGQTGL.78.00.C3 Wheel 1 4 GM65BX.00.13 Debris Filter 2 5 GM65BX.00.01.X1.01 Deck 1 6 GM65BX.A0.04 Lower Deck Housing 1 7 GM65BX.10.00 Front Axle 1 8 GM65BX.20.00.X1.
