Replacement Part List

WARNING
WARNING
10
ASSEMBLY
Fitting the guard (See Figure 2 & Figure 3.)
Before assembly, make sure that the grass trimmer is switched off and
unplugged.
1. Secure the guard with 3 screws.
2. Place the safety guard onto the motor housing as shown, pivot the guard anti-clockwise to the
position of figure 3. Secure the guard with the screw.
Never use the grass trimmer unless the guard is properly fitted.
Fitting the secondary handle (See Figure 4 & Figure 5.)
1. Place the handle on the grass trimmer as shown.
2. Adjust the handle to the most comfortable position. Use the marking as a guide.
3. Pass the bolt through the secondary handle and the main handle.
4. Screw the nut into the other side of the bolt. Do not over tighten the bolt.
Fig. 2
Fig. 4 Fig. 5