Use and Care Manual

BATTERY LED PANEL

■ The panel consists of 2 LEDs on the battery. Press and release the button, the LEDs will show

you the charge levels

■ The battery’s charge level can be checked either when the battery is attached on the machine or

removed from the machine.

OPERATION

LEDs on battery

(Continuous lighting)

Battery Capacity

Green 50%~100%

Orange 25%~ 50%

Red 0-25% (Recharge required)

BATTERY PACK AND CHARGER

- If the temperature range and charging current are correct and flashing red LED light continues,

then remove and reinstall the battery pack. If the LED status repeats a second time, try to

charge another identical battery. If the battery charges normally, dispose of the defective

battery pack (see Environmental Safe Battery Disposal section).

- If the flashing red light continues after installing the second battery, the charger may be

defective. Replace with a new one.

■ After continuous or repeated charging cycles without interruption, the charger may warm up.

This is normal and does not indicate a technical defect of the battery charger.

The indicator lights on the charger show the charger status:

SYMBOL

Green, continuous Fully charged

INDICATOR LIGHTS STATUS

Connected to power supply

Power Indicators

Charging problem:

See Technical Issue

Red, blinking

Red, continuous

Green, blinking Charging