Use and Care Manual

ASSEMBLY

A flashing LED on the cutting mode control panel indicates that the current is too high. A flashing

LED on the battery indicates that the voltage is too low. In either case the motor will be shut down

automatically. Do not continue to activate the On/Off switch if the motor has been shut down

automatically. The battery may be damaged.

WARNING

iPOWER MOWER MODE INDICATOR (20a)

(See Fig. 18)

Located on upper mower handle

■

By default, the motor power is set to “AUTO” and will automatically

adjust to your lawn.

■ Push the press button repeatedly to cycle through the different

motor power levels.

• Set the motor power to “1”, if your lawn needs only light mowing.

• Set it to “2”, if you are going to mow taller and thicker grass.

• Set it to “3” to utilize the maximum motor power for mowing the

most stubborn grass.

iPOWER BATTERY METER INDICATOR (20b)

(See Fig. 18)

■ Push the press button to check on the battery status.

■

The number of lights lit will depend on the condition of the battery.

■

4 lights indicate a fully charged battery, 1 light indicates the battery

needs to be charged.

iPower Control Panel (20)

Fig. 18

20a 20b