Warranty

ASSEMBLY
12
Fig. 7
Fig. 8 Fig. 9
Fig. 6
Fig. 4 Fig. 5
A
B
Lock
INSTALLING COLLECTION BAG WITH SHOULDER STRAP
1. Open vacuum gate (See Figure. 4)
2. With gate open, align tabs on vacuum tube with opening inside gate (See Figure. 5 )
3. With vacuum tube properly aligned, insert into aligned gate opening and twist vacuum tube.
(See Figure. 6)
4. Add collection bag by simply aligning the plastic connector sleeve on the bag to the blowers
exhaust. (See Figure. 7)
5. While standing in the operating position adjust the length to fit the operator’s size. pull the tab to
lengthen, pull the strap to shorten.(See Figure. 8 - Figure. 9)
Open
Shut