Operators Manual EN p. 2 8 Amp Electric Blower BL705 LawnMaster_BL705 Read all safety rules and instructions carefully before operating this tool.
CONTENTS Important Safety Instructions 3-4 Specific Safety Rules 4 Symbols 5 Electrical Information 6 Features 7 Assembly 8 Operation 9-10 Maintenance 11 Troubleshooting 11 Warranty 12 Exploded View 13 Parts List 14 PRODUCT SPECIFICATIONS 8 AMP BLOWER Voltage 120 V ~ 60Hz 8A Amp Max Air Speed 160 MPH Max Air Volume 160 MPH 4 lbs.( 1.
IMPORTANT SAFETY INSTRUCTIONS AND UNDERSTAND ALL INSTRUCTIONS.Failure to follow all WARNING: READ instructions listed below may result in electric shock, fire, and/or serious personal injury. READ THESE INSTRUCTIONS BEFORE USING THIS BLOWER Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
IMPORTANT SAFETY INSTRUCTIONS Do not pull or carry by cord, use cord as a handle, close a door on a cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Do not handle plug or appliance with wet hands. Use only identical manufacturer’s replacement parts and accessories. Use of any other parts may create a hazard or cause product damage.
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
ELECTRICAL INFORMATION DOUBLE INSULATION Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual threewire grounded power cord. All exposed metal parts are isolated from the internal metal motor components with protecting insulation. Double insulated tools do not need to be grounded. WARNING: The double insulated system is intended to protect the user from shock resulting from a break in the tool’s internal insulation.
FEATURES KNOW YOUR BLOWER This product has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the design of this product making it easy to maintain and operate. See Figure 1. A B D C A - ON/OFF switch B - Blower tube C - Cord retainer D - Plug Fig. 1 The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting.
ASSEMBLY UNPACKING This product requires assembly. Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. WARNING: Do not use this product if any parts on the Packing List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury.
OPERATION WARNING: Do not allow familiarity with products to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with hearing protection. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this product.
OPERATION Attach the outlet end of an extension cord to the plug on the rear of the blower. NOTE: Use only an approved outdoor extension cord as described previously in this manual. Route the extension cord through the side of the loop located on the rear of the blower housing and place underneath the cord retainer. To start the blower, place the power switch in the ON position. To stop the blower, place the power switch in the OFF position. OPERATING THE BLOWER See Figure 5.
MAINTENANCE WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with hearing protection. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. WARNING: Before inspecting, cleaning or servicing the machine, unplug the power cord and wait for all moving parts to stop.
WARRANTY We take pride in producing a high quality, durable product. This Lawnmaster® product carries a limited two (2) year warranty against defects in workmanship and materials from date of purchase under normal household use. If product is to be used for commercial, industrial or rental use, a 30 day limited warranty will apply. Batteries carry a one-year warranty against defects in workmanship and materials.
EXPLODED VIEW 13
PARTS LIST PART NUMBER PART CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 GF26BL.00.01 GF26BL.A0.01 TM8264.00.00 TODXL1.A1.UL WODQ10.02.06 GF26BL.10.03 TODXD1.44.UL GF26BL.10.01 GF26BL.10.04 GF26BL.10.30 GF26BL.10.40 TM8201.00.01 BOB1WL.08.
