Full Product Manual

www.LaViewUSA.com www.LaViewUSA.com16 17
Select the channels for which you want the motion
detection event to trigger recording.
Click Apply to save the settings.
Click OK to go back to menu.
Exit the Motion Detection menu.
For detailed information on schedule conguration,
see Chapter Conguring Record Schedule.
Manual Record
Purpose:
Follow the steps to set parameters for manual
recording.
Steps:
Enter the Manual settings interface.
Menu> Manual
Or press the REC button on the remote control.
Manual Record
Enabling Manual Record:
Select Record on the left bar.
Next to the camera number, change
to .
Disabling manual record:
Next to the camera number, change
to .
Note: After rebooting, all manual records enabled
are canceled.
Start all-day continuous recording or all-day motion
detection recording of all channels:
Click
for or .
Continuous Recording
Motion Detection Recording
Click to enable all-day continuous
recording or all-day motion detection recording on
all channels.
Playing Back Record Files
Playing Back by Channel
Purpose:
Play back the recorded video les of a specic
channel in live view mode. Channel switch is
supported.
OPTION 1:
Choose a channel in live view mode using the mouse
and click the
button in the quick setting toolbar.
Note: In instant playback mode, only les recorded
during the last ve minutes on this channel will be
played back.
Instant Playback Interface
OPTION 2:
Enter the Playback interface.
Mouse: right click a channel in live view mode and
select from the menu.
Right-click Menu under Live View
Front Panel: press PLAY button to play back
recorded les from the channel under single-screen
live view mode.
When on multi-screen live view mode, the recorded
les from the top-left channel will be played back.
Note: During playback process, pressing the
numerical buttons will switch playback to the
corresponding channels.
Playback management:
The toolbar on the bottom of the Playback interface
can be used to control playing progress.
Playback Interface
Click on multiple channel(s) to execute simultaneous
playback.
Toolbar of Playback
Note:
indicates the start/end time of recording.
Detailed Explanation of Playback Toolbar
Note: Playback progress bar: Use the mouse to click
on point in the progress bar or drag the progress bar
to locate specic frames.
Playing Back by Time
Purpose:
Play back video les recorded in specied time
duration. Multi-channel simultaneous playback and
channel switch are supported.
Steps:
Enter playback interface.
Menu>Playback
Check off channel(s) in the channel list and then
double-click to select a date on the calendar.