Full Product Manual

18 www.laviewsecurity.com
[status]Show the current channel connection status： Connection is normal， ID or Password
is wrong， the equipment is offline， User is locked.
*IP address/domain name+Display the equipment’s IP address/domain name.
[Port]Display the port number
[Web Port]Display the web port number.
[Agreement]Display the connection agreement.
[Edit]Configure the channel information，shown in6.3.6
[The front-end configuration]Configuration of front camera’s parameters
We provide three ways to add device: automatically, searching, manually add the device.
Automatically add
No configuration, the device is automatically added.
[Main Menu]-[Configuration]-[NET channel Management]-[Open UPNP]
Note ： The device should support UPNP and should be in the same LAN.
Searching Added
Search all the IPC via internet and then choose to add.
Enter [NET channel Management]
Click [Filter] to choose protocol
Click [Search]
Click+ to add device or Right click[Add to]to choose the channel you want or check the devices
you want to add, then click[Batch Add]
3.3.2 RECORD
Figure 3. 4 Video interface
Table 3. 3 Description of Video
Index
Item
Description
1
【Channel】
Select the desired channel
2
【Compression】
H.264
3
【Resolution】
The resolution of main stream can be 720P. Different channels to
different resolutions. Frame rate can also be different. The