Full Product Manual

14 www.laviewsecurity.com
3
Check the enable switch
4
[Sensitivity]
Set sensitivity of the network channels
5
[Set area]
It should be set in the IPC
6
[Process]
Click the button to set the alarm time, linkage and the
handling method.
Figure 2. 8 Record interface
[Linkage Set]When creating an alarm, you can activate the linkage of records, PTZ, touring and
capturing.
Figure 2. 9 Motion Detect-Link interface
2.6.2 Alarm Status
If you select [Show Message] in linkage settings, the following message will pop up when the
alarm occurs.