Full Product Manual

www.laviewsecurity.com 9
Chapter 2 Basic Operations Guide
2.1 Power on and Off
2.1.1 Power On
Correctly install and power on the NVR. When the power indicator lights up, The NVR will
automatically detect the hardware state of the device. The booting process will continue for
about 45 seconds. After boot, the equipment enters multi-screen real-time video surveillance.
2.1.2 Power Off
Steps:
There are two proper ways to shutdown the NVR. To shutdown the NVR:
 OPTION 1: Standard shutdown
1. Enter the Shutdown menu.
Menu > Shutdown
Figure 2. 1 Shutdown menu
2. Select the Shutdown button.
3. Click the Yes button.
4. Turn off the power switch on the rear panel when the message box appears.
 OPTION 2: By operating the front panel
1. Enter the administrator’s username and password in the dialog box for authentication.
2. Select the Shutdown button and Click the Yes button.