Installation Instructions

Connect Camera to Power
Connect camera to power using included power adapter and wait 30
seconds for camera to initilize. The LED indicator will flash in blue
and red when the camera is ready for set up.
LED Indicator:
• Flashing Blue and Red: Ready for Wi-Fi setup
• Steady Blue: Camera is connected properly
• Solid Red: Device is activating
• Slow Flashing Red: Network Error
• Fast Flashing Red: MicroSD card or other error
1
For more instruction
and video tutorials, visit:
www.laviewsecurity.com/onedot
LaView ONE
2 3
4
i
Power Cable
Power Socket
To reset the camera, press and hold the RESET button for 10 seconds
Foam Sticker
Metal Plate Magnetic Base