Assembly Instructions

User Manual of Network Camera

Configuration > Basic Configuration> System > Maintenance

Or Configuration > Advanced Configuration> System > Maintenance

2. Click Restore or Default to restore the default settings.

Figure 10-13 Restore Default Settings

Note:

After restoring the default settings, the IP address is also restored to the

default IP address, please be careful for this action.

10.7.3 Exporting / Importing Configuration File

Purpose:

Configuration file is used for the batch configuration of the camera, which can

simplify the configuration steps when there are a lot of cameras needing configuring.

Steps:

1. Enter the Maintenance interface: Configuration > Basic Configuration> System >

Maintenance, or Configuration>Advanced Configuration> System > Maintenance

2. Click Export to export the current configuration file, and save it to the certain

place.

3. Click Browse to select the saved configuration file and then click Import to start

importing configuration file.

Note:

You need to reboot the camera after importing configuration file.

4. Click Export and set the saving path to save the configuration file in local storage.

Figure 10-14 Import/Export Configuration File