Assembly Instructions

User Manual of Network Camera

Basic Settings

Steps:

1. Enter the Snapshot Settings interface:

Configuration > Advanced Configuration > Storage > Snapshot

2. Check the Enable Timing Snapshot checkbox to enable continuous snapshot.

Check the Enable Event-triggered Snapshot checkbox to check event-triggered

snapshot.

3. Select the quality of the snapshot.

4. Set the time interval between two snapshots.

5. Click Save to save the settings.

Uploading to FTP

You can follow below configuration instructions to upload the snapshots to FTP.

 Upload continuous snapshots to FTP

Steps:

1) Configure the FTP settings and check Upload Picture checkbox in FTP Settings

interface. Please refer to Section 6.3.10 Configuring FTP Settings for more details

to configure FTP parameters.

2) Check the Enable Timing Snapshot checkbox.

 Upload event-triggered snapshots to FTP

Steps:

1) Configure the FTP settings and check Upload Picture checkbox in FTP Settings

interface. Please refer to Section 6.3.8 Configuring FTP Settings for more details

to configure FTP parameters.

2) Check Upload Picture checkbox in Motion Detection Settings or Alarm Input

interface. Please refer to Step 3 Set the Alarm Actions Taken for Motion

Detection in Section 6.6.1, or Step 4 Configuring External Alarm Input in Section

6.6.4.

3) Check the Enable Event-triggered Snapshot checkbox.