Assembly Instructions

User Manual of Network Camera
56
6.4.4 Display Info. on Stream
Check the checkbox to enable the function of Dual-VCA which can be used
cooperatively with NVR to implement dual-VCA retrieval during playback.
Figure 6-28 Display Info. on Stream
6.5 Configuring Image Parameters
6.5.1 Configuring Display Settings
Purpose:
You can set the image quality of the camera, including brightness, contrast,
saturation, hue, sharpness, etc.
Note:
The display parameters vary according to the different camera model. Please refer to
the actual interface for details.
Steps:
1. Enter the Display Settings interface:
Configuration > Basic Configuration> Image> Display Settings
Or Configuration > Advanced Configuration> Image> Display Settings
2. Set the image parameters of the camera.
Note:
In order to guarantee the image quality in the different illumination, it provides two
sets of parameters for user to configure.
Day/night Auto-switch