Use And Care Manual

User Manual of Digital Video Recorder
169
b) The search condition is incorrect.
c) The HDD is error or not detected.
Steps:
1. Verify the system time setting is correct.
Select Menu > Configuration > General > General, and verify the Device Timeis correct.
2. Verify the search condition is correct.
Select Playback, and verify the channel and time are correct.
3. Verify the HDD status is normal.
Select Menu > HDD > General” to view the HDD status, and verify the HDD is detected and can be
read and written normally.
4. Check if the fault is solved by the above steps.
If it is solved, finish the process.
If not, please contact the engineer from our company to do the further process.