Installation & Assembly

INSTALLATION MANUAL
FOR THE DROP-IN GRANITE SINK
drill silicone
adhesive
jigsaw pencil tape
measure
safety
goggles
template
w. sink
dimensions
WHAT YOU WILL NEED
WHAT YOU SHOULD DO
1) Draw the outline of the template in the
desired location on the countertop
2) Use the drill to make holes in corners
of the outline (from its inside)
3) Place a bracket under the part of the
countertop that you plan to cut out.
4) Cut the marked outline in the cabinet
with a jigsaw
5) Lay the sink upside down on a table
and install faucet and accessories
6) Apply a continuous path of silicone to
the bottom of the sink frame,
approximately 1/4" inside the perimeter
7) Insert the sink into the opening in the
countertop, press down and let the
silicone dry for 30 mins.
8) Connect the siphon and faucet and
enjoy your new Lavello sink