SERIAL PORT LAVA SP-PCIe Quick Installation Guide P.N. MOKO L144.x LAVA COMPUTERS SEMICONDUCTOR MADE IN CANADA MCS9901CV-AA INSL10200 4E42503 - 06 0743 SP-550 PCIe Rev.
1 Windows Hardware and Driver Installation 1. Before opening the casing of your computer, make sure that all power is off. 2. Locate an unused PCIe slot and insert the SP-PCIe card into it. Ensure that the card is well seated. 3. Screw the metal bracket of the SP-PCIe card to your PC’s casing and replace the machine’s cover. 4. Turn the PC on. 5. When Windows starts, it will find an SP-PCIe Controller and will ask you for a driver for this device.
2 Changing the Com numbering of the SP-PCIe port In Windows 2000/XP/Vista, Com port numbering can be changed by double-clicking the serial port entry displayed in Windows' Device Manager (as described earlier). Go to Port Settings | Advanced, and choose Com Port #. Release Notes: A. Because the SP-PCIe card uses PCI (not ISA) I/O address ranges, it will never be seen by your BIOS at boot-up as a standard port even if the address has been changed in Windows using the above procedure.
LAVA Technical Support 9:00 am to 5:30 pm Monday to Friday (Eastern Time) Tel: +416 674-5942 Fax: + 416 674-8262 E-mail: tech@lavalink.com Internet: www.lavalink.com LAVA Computer MFG Inc. This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
