Operation Manual

6
2.9. Connection to Network
When the SIM card is successfully unlocked, the handset will automatically search
for available network. The handset will show the information of the network
provider; the status bar will show the signal strength and the network condition
once the handset is successfully connected to a network.
Note: If the lock screens shows "Emergency calls only", it means that you're out of
network coverage (service coverage) or your card is not valid, yet you can still have
emergency calls.
2.10. Charging the Battery
To charge the battery, plug in the charger connector at the bottom of your phone
(USB interface) and then plug the other line end into an AC power socket.
The battery icon indicates the charging state. While charging, the charge indicate
lightning icon.
3. Basic Function
3.1. Make Calls
When the network provider is valid, touch the phone icon appears on the standby
screen, you can call out or answer calls. The indicator on the upper right part shall
show the signal strength.
Quality of connection will be greatly influenced by obstructions. So movement in a
small range may effectively improve the quality of connection.

Make Domestic Calls
Use virtual keyboard to enter phone numbers and then press Dial icon to call.

Call Extension Phone
Type in as follows to call extension phone:
Area code > switchboard number > Add 2-sec pause > extension phone number>
call

Make International Calls
Type in as follows to call international phone:
+ > country code > complete destination number > dialing icon.

Make Listed Calls
Listed phone numbers can be called out by pressing the phone number or sliding
the phone number to right.

Emergency Calls
You can call for emergency service as long as you are in the network coverage. If
your network provider doesn't provide roaming service in this area, there will be
"Emergency Calls only" on the lock screen.