Manualshelf

Operation Manual

ManualsBrandsLava ManualsSmartphonePixel V2
11121314151617181920
12
device detects and install the operator settings automatically as soon as you insert
your SIM card.
WARNING: To avoid any over cost contact your operator to know more about
best plans.
Connect to Wi-Fi Networks
To browse the Internet via Wi-Fi:
Go to Menu> settings> Under wireless & networks tab select Wi-Fi and then turn it
ON, select the WIFI connection listed under Wi-Fi networks with which you want
to connect> Enter the password of Wi-fi network with which you want to connect.
Note: Make sure that Wi-Fi network with which you want to connect is in the range
and is active.
Pair With Bluetooth Devices
Go to Settings > Wireless & networks> Bluetooth.
If Bluetooth is off, check Bluetooth to turn it on. Your phone scans and displays the
Bluetooth devices in range.
If the device you want to pair with is not in the list, make it discoverable.
If your phone stops scanning before you make the other device discoverable, touch
Refresh.
Touch the ID of the other device in the list Settings to pair them. If you are
prompted to for a password, enter any password on one device and enter the same
password you entered in the other device to be paired, If the pairing is successful,
your phone connects to the device.
Connect to Internet on your PC via Phone
You can browse the Internet on your PC using your mobile phone. This can be done
in 2 ways:
To access both the options make sure your phone has an active data plan and
mobile data is “ON”.
USB Tethering:
Connect your mobile phone to your PC via the USB cable.
Go to Settings> Wireless & Networks>More >Tethering & portable hotspot>
USB tethering.
Your PC will then read the necessary drivers of your phone and you can then
access internet on your PC.
Wi-Fi Hotspot:
Go to Settings> Wireless & Networks>More >Tethering & portable hotspot>
Turn ON Wi-Fi Hotspot.
Once the device Wi-Fi Hotspot is active you can see a white icon denoting
wireless network on the notification pane.
Note: You can select the desired security settings for your hotspot network by
following below steps: