User Manual

Windows XP may display a message to the effect that the drivers are
not digitally signed.This warning can be ignored.
6. Windows must detect each of the parallel ports on the Dual Parallel-
PCI card individually.The second port will therefore only be
detected the first port has been installed. Once have
been detected Windows must be restarted to complete the
installation.
7. The Dual Parallel-PCI card's ports will appear in Control
Panel|System|Device Manager under Ports, as a listing similar to the
one below. If required, settings may be customized by clicking on a
particular port and then clicking Properties.Please note that
changes to default settings may be required by users connecting
the Dual Parallel-PCI card to a non-printer peripheral (see reverse).
Users connecting a printer should use default settings.
after both ports