User Manual

Windows Hardware and

Driver Installation

1. Before opening the casing of your computer,make sure that all

power is off.

2. Locate an unused backplane slot in your PC casing (preferably one

that does not correspond to a slot),and fit the Port B cable into it.

Insert the Dual Parallel-PCI into an unused PCI slot.

3. Screw the metal brackets of the Dual Parallel-PCI card to your PC’s

casing and replace the machine’s cover.

4. Connect your parallel (printer) cable to the port on the Dual Parallel-

PCI card and turn the PC on.

5. When Windows starts, it will find a Parallel-PCI Controller and will ask

you for a driver for this device.When prompted,insert the

installation diskette into your floppy drive. After copying the

necessary files from the diskette,Windows will ask if you wish to

restart your PC to complete the installation. Choose . Note:NO

PCI Slot

Screw for attaching card bracket

to PC casing

Connector for Port B

Red wire on cable must

correspond to 1

Port A