Instructions / Assembly

Hardware Used
Hardware Used
10
10. Assemble the deck cover bracket.
Secure the deck cover and bracket to the pole with
4pcs M6X12 bolts. This step also secures the
head assembly to the pole.
11. Secure the upper deck cover.
Push the upper deck cover upwards until it is flat against
the head assembly. Line up the holes on upper deck
cover to the holes on deck cover bracket. Secure them
with 2pcs M4 X 10 screws.
12. WARNING:Remove protective cover before
assembling.
Note: If necessary for proper alignment of reflector
sections, loosen each bolt prior to further assembly
and retighten after sections are aligned.
A
B
11
12
HH
Bolt M6 X 12
x 4
II
Screw M4 X 10
x 2
J
HH
II
ASSEMBLY INSTRUCTIONS
-8-