Users Manual Part 1

20 Count
Chapter 2 DESCRIPTION OF OPERATION K12
Count (Continued)
STEP-4 Align the notes and put the notes
onto the Hopper.
± The count starts automatically.
± If the count does not start automat-
ically, press START/STOP Switch to
start count.
± It is possible to put additional notes
to the Hopper.
± When the count starts, Main-Display
indicates count result in value or
quantity.
FUNCTION
FITNESS
SETTINGS
CF
SETTINGS
DISPLAY
FITNESS
ATM
SORT
FACE
ORIENT
ISSUE
x It is possible to check the detailed
count results or reject reasons by
changing display indication. Please
refer to Count Display Page 7.
Point
± When the pocket becomes full, the
count stops once even if notes remain
on the Hopper. The count will start
after removing notes at the pocket.
FUNCTION
FITNESS
SETTINGS
CF
SETTINGS
DISPLAY
FITNESS
ATM
SORT
FACE
ORIENT
ISSUE
x The count result is accumulated
to the present transaction. There-
fore be sure not to recount the
notes which are taken out form
the pocket.
Miscalculation
STEP-5 When completing the transaction
after the count, be sure no note
on the Hopper and press START/
STOP switch.
± When START/STOP switch is pressed
without note at the Hopper, the count
result on the display is cleared.