Users Manual Part 1

xii
DescriptionofThisManual
DescriptionofThisManual
Count
27
Chapter2DESCRIPTIONOFOPERATIONK4/K8
Alignthenotesandputthenotes
STEP-3
ontotheHopper.
Thecountstartsautomatically.▷
Ifthecount does notstart▷
automatically,pressSTART/STOP
Switchtostartcount.
Itispossible to putadditional▷
notestotheHopper.
Whenthecount starts, Main-▷
Displayindicatescount resultin
valueorquantity.
Itispossibletocheckthedetailed
♦
countresultsor reject reasons
bychangingdisplay indication.
PleaserefertoCountDisplaypage
9.
Whencompleting thetransaction
STEP-4
afterthe count,be surenonote
ontheHopperandpressSTART/
STOPswitch.
WhenSTART/STOPswitch is▷
pressedwithoutnote atthe
Hopper,thecount resultonthe
displayiscleared.
Whenthepocketbecomesfull,the▷
countstopsonce evenifnotes
remainonthe Hopper.Thecount
willstartafter removingnotesat
thepocket.
Thecountresult is accumulated
♦
tothepresent transaction.
Thereforebesure nottorecount
thenoteswhich aretakenout
formthepocket.
Point
Miscalculation
FUNCTION
FITNESS
SETTINGS
CF
SETTINGS
DISPLAY
FITNESS
ATM
SORT
FACE
ORIENT
ISSUE
FUNCTION
FITNESS
SETTINGS
CF
SETTINGS
DISPLAY
FITNESS
ATM
SORT
FACE
ORIENT
ISSUE
STEP-3
It describes operation
procedure.
▷
Supplemental remarks
aboutoperation.
Point
It describes important
pointsforoperation.
Miscalculation
Itdescribes
miscalculation.