Installation Guide

One Piece ADA/Barrier Free Showers
36” ADA Gelcoat & Solid Surface Transfer Showers
60” ADA Gelcoat & Solid Surface Roll-In Showers
Installation Instructions
Rough In Pocket
Drywall Installation
Screws
Framing
Studs
Shower
Drywall
Mounting
Flange
NOTE: Shower Dimensions may vary + - 1/2”.
Build Framing 1/4” wider than
Shower width for “Wiggle-Room”.
Blocking
(optional)
Thin-Set mortar under shower
is MANDATORY to provide
support.
Outlet
C
L
5”- 6” Dia.
Core
Unit
Height
Framing
Height
Unit
Depth
Unit
Width
*
*
C
L
Outlet
Figure 12
DO NOT USE ABRASIVE CLEANERS
The most important caution is to avoid use of harsh abrasive cleaners or gritty scouring powders. To clean the unit, simply
use a household liquid detergent with soft sponge cloth and warm water. More persistent stains, tar, or paint can be removed
with naptha or mineral spirits. Remove excess plaster by scraping with a sharpened soft wood stick. Avoid wire brushes, metal
scrapers or tools. Restore dull areas by rubbing with automotive type body cleaning compound.