LAUREL MOUNTAIN COLONY COLLECTION OWNER’S MANUAL For your installation, operation, and maintenance needs. Air Bath & Soaking Tubs Laurel Mountain Service Center: 1-800-930-0050 AQ.
Laurel Mountain Air Bath & Soaking Tub Owner’s Manual About this Owner’s Manual AQ2-17 Laurel Mountain has gained popularity by the variety of bathtubs and showers available. This manual covers the installation, operation, and maintenance needs for Laurel Mountain air baths & soaker tubs. If you have any questions or need additional information on your Laurel Mountain bath, you can contact our customer service department at 1-800-930-0050 between 6:00 am and 6:00 pm EST Monday – Friday.
deflection or movement of the tub, but ensuring that the weight of the tub is not supported in any way by the blocking. (Diagram A) When placing the unit in a platform floor or cut out installation, the opening should be 1” smaller than the specified rim dimensions. Skirted models should be placed in a pre-measured studded pocket. Pre-drill holes through the flange to align with studs. Use screws to secure to studs (Diagram B). DO NOT attempt to nail directly through the flange. Always pre-drill the holes.
The air bath is operated by touching the control pad pictured below. 1. ON/OFF – Press to start, press again to stop 2. PULSE CYCLES - Pressing this button once will turn on Wave Mode which fluctuates the blower from minimum to maximum power. Pressing the button again changes to Pulse Mode. In Pulse Mode, the blower will release air in short, intense bursts. Pressing the button again will return the blower to normal. 3. INCREASE SPEED – Press and hold to increase the speed of air flow.
