Assembly Instruction

ASSEMBLY INSTRUCTION

This page lists all the contents included in the box.

Please take the time to identify the hardware as

well as the individual components to this product.

As you unpack and prepare for assembly, place

the contents on a carpeted or padded area to

protect them from damage.

A B C D

F G H

Top Panel

1PC

2PCS2PCS 6PCS 22PCS

1PC 1PC 2PCS 2PCS

Bolts

1/4”x1-1/4”xØ15

Bolts

1/4”x2”xØ15

Lower Cross

Bars

Allen Wrench

1/4”

Bolts

1/4”x5/8”xØ15

Lower Shelf

Side Frames

Upper Cross Bars

SOFA TABLE WITH SHELF

PAGE 1
ASSEMBLY INSTRUCTION SOFA TABLE WITH SHELF A B Top Panel C Lower Shelf 1PC E Lower Cross Bars 2PCS I 1PC F 2PCS D 2PCS G Bolts 1/4”x2”xØ15 Side Frames Bolts 1/4”x1-1/4”xØ15 6PCS Upper Cross Bars 2PCS H Bolts 1/4”x5/8”xØ15 22PCS Allen Wrench 1/4” 1PC This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
PAGE 2
***Do not tighten screws & bolts until the entire unit is completely assembled. 1 Use the Philips Screwdriver (not provided) to loosen the screws and remove the MDF boards from Top Panel (A). A 2 Attach both Side Frames (C) to Upper Cross Bars (D) and Lower Cross Bars (E) using Bolts (H) and Allen Wrench (I) as shown.
PAGE 3
Attach Lower Shelf (B) to Lower Cross Bars (E) using Bolts (H) and Allen Wrench (I). C D D B H E C 4 Attach Top Panel (A) to Upper Cross Bars (D) and Side Frames (C) using Bolts (G) and Bolts (F) with Allen Wrench (I). C F D G C D F A Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time.