Installation & Assembly

2 of 2 Coat Hooks

Step 2

Remove all parts and hardware from packing material. Wooden pieces should be placed on a non abrasive surface

(like the carton or carpet) to prevent damage to the finish. Note the French Cleat (B) is pre-installed on the back

of the Hook Plate (A) with 2 of the Wood Screws (C).

Step 3

Remove the French Cleat (B) from the back of the Hook Plate (A) by

unscrewing 2 of the pre-installed Wood Screws (C) on the top of

the Hook Plate (B). Locate studs behind drywall in desired location.

Attach French Cleat (B) to wall studs with 2 Wood Screws (C).

Step 4

Set Hooks Plate (A) on French Cleat (B).

Step 7

Attach Hook Plate (A) to French Cleat (B)

with 2 Wood Screws (C).

CARE

Clean with mild soap and wipe dry.