Assembly Instructions

Step 5
Step 6
CARE
Attach 2 Doors (F). Insert 40MM Bolt (J) in to threaded insert in underside of rail on Top
Assembly. Align hole in top of Door (F) with 40MM Bolt (J). Thread 60MM Bolt (I) thru
rail on Bottom Shelf. Align in to Hole on bottom side of Door (F). Repeat for second door.
Attach Wood Pulls.
Clean with a non abrasive cloth using a mild soap. Make sure to wipe dry.
Attach Bottom (E) to Side Assemblies (C & B) using 4-35MM Hex Bolts (H). Note: TIGHTEN ALL
BOLTS AT THIS TIME. Attach wooden knob to outside of drawer front. Insert the Drawer in to the Top
Assembly. Insert Shelf Clips (M) in to desired location. Place Adjustable Shelf on (G) on Clips.
3 of 3 Accent Table
REPLACEMENT PARTS:
For best service, to order replacement parts go to our website. Use the order form on the web site to order your
replacement parts. Thank You!