Assembly Instructions

Accent Table Assembly Instructions

Parts

NO. QTY.DESCRIPTIONDRAWING

TOP

SIDE PANEL-R

SIDE PANEL-L

BACK PANEL

BOTTOM

DOORS

SHELF

KNOBS

KNOB SCREW

NO. QTY.DESCRIPTIONDRAWING

WRENCH

35MM BOLT

ANTI-TIP

60MM BOLT

40MM BOLT

SHELF CLIP

Country Cottage Accent Table

1 of 3 Accent Table

Thank you for purchasing our Country Cottage Accent Table. We have found it helpful to have a second

person present during the assembly process.

PAGE 1
Country Cottage Accent Table A C D G B F F E Thank you for purchasing our Country Cottage Accent Table. We have found it helpful to have a second person present during the assembly process. Accent Table Assembly Instructions NO. DRAWING DESCRIPTION QTY. A TOP 1 B SIDE PANEL-R 1 Parts NO. DRAWING DESCRIPTION QTY.
PAGE 2
Step 1 Read through these instructions thoroughly before beginning assembly. We have found this to be of great value when assembling this product. Step 2 Remove all parts and hardware from packing material. Wooden pieces should be placed on a non abrasive surface to prevent damage to the finish. Step 3 Remove Drawer from Top Assembly (A). Lay Top Assembly (A) upside down on a non abrasive surface. Attach Side Assembly (C) using 4-35MM Hex Bolts (H). NOTE: Do not tighen firmly at this time.
PAGE 3
Step 5 Attach Bottom (E) to Side Assemblies (C & B) using 4-35MM Hex Bolts (H). Note: TIGHTEN ALL BOLTS AT THIS TIME. Attach wooden knob to outside of drawer front. Insert the Drawer in to the Top Assembly. Insert Shelf Clips (M) in to desired location. Place Adjustable Shelf on (G) on Clips. Step 6 Attach 2 Doors (F). Insert 40MM Bolt (J) in to threaded insert in underside of rail on Top Assembly. Align hole in top of Door (F) with 40MM Bolt (J). Thread 60MM Bolt (I) thru rail on Bottom Shelf.