Installation & Assembly

A: 10"

B: 7.5 "

Spare Parts List:

Assembly Kit

5797MM (1 SET)

Mounting Screw (C)

Lock Nut (D)

Wire Connector

Ball Nut (H)

Mounting Strap (A)

Fixture Mounting

Screw (E)

Green Grounding

Screw (B)

Rubber Pad (I)

Strain Relief(G)

8. Pull the cord (A) down slightly until the strain relief touches the hex nut .Attach the canopy to the mounting strap by

inserting two fixture mounting screws. then secure it with two ball nuts and two rubber pads.

Note: Adjust the strain relief can decrease or increase the length of cord exposing outside.

The following parts are available for re-order if damaged or missing.

9. Attach shade to fixture, then secure it with socket ring.

10. Install bulb(not included). See relamping label at socket area or packaging for maximum allowed wattage.

Turn on the power at fuse or circuit box.