Owner Manual

PLEASE READ AND SAVE FOR FUTURE REFERENCE.
CAUTION
1. Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock.
2. All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If
you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician.
GENERAL
Remove all parts and hardware from the box and make sure that none are missing by referencing the illustrations
provided.
Bulbs Required (not included): 3 Medium Base 100 Watt Max. (for 3-light vanity bar)
4 Medium Base 100 Watt Max. (for 4-light vanity bar)
2
3
4
5
6
7
8
1
3-LIGHT VANITY
4-LIGHT VANITY
1. OUTLET BOX
2. MOUNTING PLATE
3. OUTLET BOX SCREWS and WASHERS
(pre-attached to outlet box)
4. FIXTURE GROUND WIRE
5. SUPPLY GROUND WIRE (not included)
6. WHITE SUPPLY WIRE (not included)
7. RIBBED (or WHITE) FIXTURE LEAD WIRE
8. BLACK SUPPLY WIRE (not included)
9. SMOOTH (or BLACK) FIXTURE LEAD WIRE
10. WIRE CONNECTOR
11. GROUND SCREW (pre-attached)
12. WALL ANCHOR SCREW
13. FIXTURE SCREWS and HEX NUTS
(pre-attached)
14. FIXTURE
15. DECORATIVE NUT
16. SOCKET RINGS (pre-attached)
17. CLEAR GLASS SHADES
18. ALABASTER GLASS SHADES
19. SOCKET WASHERS (pre-attached)
20. RUBBER WASHERS (pre-attached)
21. DECORATIVE SCREWS (pre-attached)
22. WALL ANCHORS
14
12
10
21
20
19
18
17
16
15
11
9
13
22
13

Summary of content (2 pages)