Assembly Instructions

Step 2
Step 3
Step 4
CARE
Remove all parts and hardware from packing material. Wooden pieces should be placed on a
non abrasive surface to prevent damage to the finish.
Lay Top (A) upside down on a non abrasive surface. Attach 2 Posts (B) using 2-45MM Hex
Bolts (D). NOTE: Do not tighen firmly at this time.
Attach Bottom (C) to Post (B) using 2-45MM Hex Bolts (D). Note: DO NOT TIGHTEN
AT THIS TIME! Attach two additional Post (B) to Top (A) and Bottom (C) using 4-45MM
Hex Bolts (D). TIGHTEN ALL BOLTS AT THIS TIME!
Clean with a non abrasive cloth using a mild soap. Make sure to wipe dry.
REPLACEMENT PARTS:
For best service, to order replacement parts go to our website. Use the order form on the web site to order your
replacement parts. Thank You!
2 of 2 Bench