Instructions / Assembly

Assembly Instructions
List of Parts for Assembly of Garden Table:
No.
Parts
Qty
A
Table Top
1
B
Table Leg
3
C
Leg Support
1
D
Flat Washer M8
3
E
Spring Washer M8
3
F
Nut M8
3
G
Stud M8*35
3
H
Stud M6*30
6
I
Rubber Pad(Pre-installed)
3
K
Flat washer M6
6
L
Spring washer M6
6
M
Nut M6
6
K
Caps M8
3
N
Caps M6
6
Assembly Instructions:
1,Place all parts on
a clean soft
surface.
2,Attached the Table leg on the
Table Top(B)using the
Stud(G),Washers and
Nuts(D,E,F).Tighten the Nuts
using Wrench(J). DO NOT over
tighten.(Fig.1)
3,Attach the Leg
Support(C) to the Table
Leg(B)using
Studs(H),Washers and
Nuts(K,L,M)(Fig.2)
4,Turn the Table
over and tighten all
the Nuts using
Wrench(J). DO NOT
over tighten.
5,Upon completion of full
assembly and bolted up-all
screws can be tighten down. Then
put the Caps(K&N)on the Nuts.
Your table can use now.
Warning:1)Maximum load on the edge of the table is 5kg 2)The umbrella base max size is diameter 40cm,height 38cm
K
N