Instructions / Assembly

ManualsBrandsLAUREL CANYON ManualsBistro SetsClassic Black 3-Piece Cast Aluminum Round Outdoor Bistro Set

Assembly Instructions

Please read these instructions carefully before starting assembly. We suggest you carry out the assembly on a soft surface like a carpet, so as to avoid

scratching the paint. Please note because of the nature of cast metal, you may find roughness on the surface which enhances the beauty of the product

and is not a defect.

*Do not discard any of packaging until you have checked that you have all parts and pack of fittings.

*Keep children away during assembly.This item contains small parts which can be swallowed by children.

*Retain the assembly instructions for future reference.

List of Parts for Assembly of Garden Chair:

No. Parts Qty

A Backrest 2

B Chair Seat 2

C Chair Leg 8

D Flat Washer M8 20

E Spring Washer M8 20

F Nut 20

I Rubber Pad(Pre-installed) 8

J Wrench 1

K Caps M8 20

Assembly Instructions:

1.Place all parts on a

clean soft surface.

2.Align the two Studs on the

Backrest(A) with the holes

in the Chair Seat(B)

3.Attached the Backrest (A) to the

Chair seat(B) using washers and

nuts(D,E,F). Tighten the Nuts using the

wrench(J).DO NOT over tighten.

4.Attach the legs(C) to the Chair

Seat(B) using Washers and

Nuts(D,E,F).Tighten the Nuts using

the wrench(J). DO NOT over tighten.

5,Upon comletion of full assembly and

bolted up,all screws can be tightened

down.Put all the Caps(K) on the Nuts.

Your chair can use now.

Summary of content (2 pages)

PAGE 1
Assembly Instructions Please read these instructions carefully before starting assembly. We suggest you carry out the assembly on a soft surface like a carpet, so as to avoid scratching the paint. Please note because of the nature of cast metal, you may find roughness on the surface which enhances the beauty of the product and is not a defect. *Do not discard any of packaging until you have checked that you have all parts and pack of fittings. *Keep children away during assembly.
PAGE 2
List of Parts for Assembly of Garden Table: No. A B C D E F G H I K L M K N Assembly Instructions Parts Table Top Table Leg Leg Support Flat Washer M8 Spring Washer M8 Nut M8 Stud M8*35 Stud M6*30 Rubber Pad(Pre-installed) Flat washer M6 Spring washer M6 Nut M6 Caps M8 Caps M6 Qty 1 3 1 3 3 3 3 6 3 6 6 6 3 6 Assembly Instructions: 1,Place all parts on 2,Attached the Table leg on the a clean soft Table Top(B)using the surface. Stud(G),Washers and Nuts(D,E,F).Tighten the Nuts using Wrench(J).