8'x8' Soft Top Steel Gazebo
WARNING: Fabric meets CPAI-84 specification for flame resistance. It is Not Fire Proof. The fabric will burn if left in continuous contact with any flame source. The application of any harsh chemicals to the fabric may render the flame-resistant properties ineffective. Always read and follow the instructions before use. When assembling and using this product, basic safety precautions must always be followed to reduce risk of personal injury and damage to the product or surroundings.
Parts List Description Sketch QTY A Screen 4 B Beam 4 C Slanting Beam 4 D Slanting Beam Bottom Tube 4 E Middle Beam 4 F Top Connector 1 G Hook 1 H Corner Shelf 4 J Small Canopy 1 K Big Canopy 1 M Anchor 8
Assembly Step 1 B D Fig. 2 B Fig. 1 B Fig. 3 B Fig. 3 A A A Fig. 1 A Fig. 2 D B B A Bolt Hole Fig. 3 inside A Fig.1: Open Screen (A). Fig.2: Insert Slanting Beam Bottom Tube (D) to corner of Screen (A). Repeat the above step for each corner. Fig.3: Insert Beam(B) to the top tube of Screen (A). Repeat the above step for each corner.
Assembly Step 2 Fig. 4 B B Fig. 6 C Fig. 5 E E C E Fig. 7 C B B Fig. 6 F Fig. 4 Fig. 5 E Fig. 6 Fig. 7 C C F C F E D C C E G A B Fig.4: Insert Slanting Beam (C) to Top Connector (F) long tube . Insert Middle Beam (E)to Top Connector (F) short tube. Fig.5:Put Hook (G) the Top Connector (F). Fig.6: Insert Slanting Beam (C) to Slanting Beam Bottom Tube (D) till you see the push pin out from the tube.
Assembly Step 3 Fig. 8 J Fig. 9 K H H Fig. 10 Fig. 11 Fig. 8 Fig. 9 Fig. 10 Fig. 11 H velcro C J A K A M Fig.8: Insert Slanting Beam (C) to Small Canopy (J) corner. Repeat the above step for each corner. Fig.9: Using the Big Canopy velcro to attach the screen (A) 's standing pole. Fig.10: Hanging Triangle Shelf (H) to Screen (A). Repeat the above step for each Screen (A). Fig.11: Insert 2PCS Anchor(M) to each Screen (A).
