Instructions / Assembly

8
Warning:
The cylinder uses must include a collar to protect the cylinder valve.
Do not store a spare LP-gas cylinder under or near this appliance.
Never fill the cylinder beyond 80percent full.
STEP 8
8-1. Put the Reflector through the Pins and
on the Washers.
STEP 9
9-1 . Fasten the Reflector with 3 pcs M6
Castle Nuts.
STEP 10
10-1. Turn off the Control Knob of the Burner.
10-2. Fix the 1.02 lbs. Gas Tank (not
included) to the Regulator (rotate the Gas
Tank clockwise toward the Regulator until
tighten it).
STEP 11
11-1. Close the Door Plate and lock it
with the Handle (rotate the Handle 90
degrees)