Instructions / Assembly

Assembly Instruction
Please read these instructions carefully before starting assembly. We
suggest you carry out the assembly on a soft surface like a carpet, so as to
avoid scratching the paint. Keep children away during assembly. This item
contains small parts which can be swallowed by children.
and is not to be used as a toy. This product is for residential use only. This
product is NOT intended for commercial use; unintended use will void the
warranty.
This product is not intended for use during inclement or severe weather, that
includes but is not limited to rain, hail, sleet, snow, wind, freezing conditions
and extreme heat.
Please note because of the nature of cast metal, you may find roughness on
the surface which enhances the beauty of the product and is not a defect.
Aluminum is soft metal, please do not use power tools, and over tighten may
strip threads or break the parts.
not locate the product near any sort of high heat. Do not use the product as a
support.
supervised by a competent adult at all times.
assembly instructions for future reference or warranty.
1. Step 1 Place all the parts on a clean and soft surface, identify all the parts
and hardware kits against parts list. Turn over the Table top(A) onto a flat
surface; Attached 4 table Legs(B) with hardware kits(F,G,H) to the studs pre-
installed by manufacturer on the table as Fig(1). Tighten all the nuts(H)
loosely at this stage;
2. Step 2: Now assemble the 4 Leg Connectors(C, D) which interlink and
place onto the pre-installed studs on the Legs(B) with hardware kits(F,G,H)
and loosely tighten as Fig(2). In this step, Leg connector (C) should be placed
outside of Leg Connector (D);
3. Step 3: Tighten all the nuts with Wrench(U) step by step. Do NOT over
tighten nuts. Put on all the Caps(I);
4. Step 4: Turn over the table. Your table is now ready for use. If find the
table is not stable, leveling the regulating screws pre-installed under Leg(C).
FG H I
FG H I
C
Fig(1)
B
I H G F
Fig(2)
D
A
Item
Photo
Description
Item
Photo
Description
Qty
A
Table top
1
F
Washer
12
B
Leg
4
G
Lock Washer
12
C
Leg Connector
2
H
Nut
12
D
Leg Connector
2
I
Cap
12
U
Wrench
1

Summary of content (1 pages)