Instructions / Assembly

Assembly Instruction
Please read these instructions carefully before starting assembly. We
suggest you carry out the assembly on a soft surface like a carpet, so as to
avoid scratching the paint. Keep children away during assembly. This item
contains small parts which can be swallowed by children.
Providing outdoor function and is not to be used as a toy. This product is
for residential use only. This product is NOT intended for commercial use;
unintended use will void the warranty
This product is not intended for use during inclement or severe weather, that
includes but is not limited to rain, hail, sleet, snow, wind, freezing conditions
and extreme heat.
Please note because of the nature of cast metal, you may find roughness on
the surface which enhances the beauty of the product and is not a defect.
Aluminum is soft metal, please do not use power tools, and over tighten may
strip threads or break the parts.
dry location.
Do not locate the product near any sort of high heat. Do not use the product
as a support. Do not shake or lean on the chair.
Should be supervised by a competent adult at all times.
Assembly instructions for future reference or warranty.
C
G D
A
A Fig(3)
B
F
D C
Fig(2)
C
E D
B
B
Left armrest
Fig(1)
A
D G
D F
H
D E
Right armrest
1.Step 1: Place all the parts on a clean and soft surface, identify all the parts
and hardware kits against parts list. Remember not to tighten all the bolts
before they are all set up
2.Step 2: Assemble Seat(B) and Left armrest(C) first with hardware kits(E,D)
in the order displaced as Fig(1). Do not tighten the bolt. Repeat this step to
assemble Seat(B) and Right armrest(D);
3.Step 3: Assemble Seat(B) and Back(A) with hardware kits(F,D) in the order
displaced as Fig(2) for both sides. Do not tighten the bolts;
4.Step 4: Assemble Left armrest(C) and Back(A) with hardware kits(G,D) in
the order displaced as Fig(3). Do not tighten the bolts. Repeat this step to
assemble Back(A) and Right armrest(D);
5.Step 5: Tighten all the bolts with Hexagon wrench(K). Do not over tighten
bolts, it will cause the damage of product without warranty;
Your chair should be ready for use. If your chair is not stable, double check
your assembly procedure or loosen some bolts and tighten them again.
Item
Photo
Description
Qty
Item Photo Description
Qty
A
Back
1
E
bolts(6*16)
4
B
Seat
1
F
bolts(6*50)
4
C
Left armrest
1
G
bolts(6*30)
2
H
Right armrest
1
K
Hexagon wrench
1
D
Washer
10