Safety Instructions

SAVE THESE INSTRUCTIONS CAREFULLY
• Never immerse the product in any liquid. If there is liquid
on the device unplug it immediately.
• Only plug the appliance when there is water in the boiler.
• Make sure that the lling cap is rmly closed before
plugging the appliance.
• Make sure that the device has no pressurized steam
before opening the lling cap.
• Lock the trigger as soon as you have nished steaming in
order to avoid unwanted steam emission.
• Risk of scalding due to high water discharge if the
appliance is titled 45° upwards or more than 90°
downwards.
• Risk of scalding due to high water discharge if the
appliance is excessively shacked.
• Avoid contact with hot parts to prevent burns.
• Never attempt to open the rell cap during use. Once the
appliance has completely cooled down,unscrew the rell
cap with care: the remaining pressurised steam will start
to escape after a few twists and there is a risk of burns.
• Risk of burns! Allow the appliance to cool down for at
least 30 minutes before opening the rell cap.
6
LS_IGGI_SafetyInstructions_11-2021.indd 6LS_IGGI_SafetyInstructions_11-2021.indd 6 18/11/2021 16:12:3518/11/2021 16:12:35