Installation Guide

INSTALLATION REQUIREMENTS

NOTE: If the washer/dryer and pedestal assembly are located in

a garage, 8" (203 mm) must be added under the pedestal so that

the washer/dryer is 18" (460 mm) above the garage oor.

TOOLS AND PARTS

Gather the required tools and parts before starting installation.

Tools Needed:

Utility knife 1/4" hex head ratchet

or open-end wrench

Level 9/16" open-end wrench

Pliers or slip-joint pliers Bucket

Additional Items Needed:

Towel

Sponge

Parts Supplied:

Four #12 x 5/8” hex Two retainer clips

head sheet metal (in parts bag)

screws (in parts bag)