User Manual

LAUNCH X-431 V+ User Manual — Vehicle Diagnosis
44
Fig. 4-35
* Note: please be sure to keep the VCI connector powered on while performing the
operation.
4.8.3 Activate connector
It is used to activate your diagnostic connector.
Input the Serial Number and Activation Code, and then tap “Activate” to activate
the connector.
For details on how to obtain Serial Number and Activation Code, tap the link
below to get help.
4.8.4 Firmware fix
Use this item to upgrade and fix diagnostic firmware. During fixing, please do not
cut power or switch to other interfaces.
4.8.5 My report
This option is used to view the diagnostic report generated in process of vehicle
diagnosis. Additionally, delete, share operations are also supported.
Tap “
My Report
”, there are total 2 options available.
If user records the running parameters while reading data stream, it will be
saved as .x431 file and appear under
Diagnostic Record
tab.
In case the DTC result is saved on Read Trouble Code page, .pdf or .jpg files will
be listed under
Diagnostic Report
tab.
4.8.6 Profile
Use this item to view and configure personal information.
4.8.7 Change password
This item allows you to modify your login password.
4.8.8 Help
FAQ, Quick Start Guide and User Manual are included.
4.8.9 Log out
This option allows you to logout the system. To logout the current user ID, tap
“Log Out”.