User Manual

LAUNCH X-431 V+ User Manual — General Operations
18
3 Network Setup
Note: Once WLAN is set as ON, the tablet will consume more power. While WLAN
keeps unused, please turn it off to conserve battery power.
The tablet has a built-in WLAN module that can be used to get online. Once
you’re online, you can register your diagnostic App, activate VCI device, update
the diagnostic software & APK, surf the Internet, get apps and send email on
your network.
3.1 Connect to WLAN
1. On home screen, tap
Settings > WLAN
.
2. Tap or slide the WLAN switch to ON, the tablet starts searching for all
available wireless LANs.
3. Choose the desired wireless access point / network,
 If the network you chose is open, you can connect directly;
 If the selected network is encrypted, you have to enter the right security
key (network password).
Note: On the WLAN setting page, tap and choose “Add network” to add a new
network.
Once it is connected successfully, tap the desired network from the list to view
its name, link speed, security type, IP address etc.
When this tool is in range, it will connect to the previously linked network
automatically.
3.2 Disconnect from a WLAN network
1. On home screen, tap
Settings > WLAN
.
2. Tap the network with a
Connected
status, then tap “Disconnect”.