Installation Guide

43
WIRE ROPE LUBRICATION
Lubricate wire ropes with lift in both lowered and raised position, by spraying
them with wire rope lubricant (i.e. 2001 MONOLEC®) and wiping the cable down.
WIRE ROPE ADJUSTMENT
Adjust cables if lifting is uneven or lift is not level (See chapter 7.15.3). Never
make adjustments with weight on lift. If running out of adjustment threads, cables
need to be replaced. Do not add washers or other spacers to re-use previously
used adjustment threads.
Wire rope tension adjustment should be performed when installing the lift and
every three months.