Installation Guide

3
7. The Owner/Employer shall not modify the lift in any manner without the
prior written consent of the manufacturer.
IMPORTANT SAFETY INSTRUCTIONS
1. When using this lift, basic safety precautions should always be
followed, including the following:
2. Read all instructions in this manual and on the lift thoroughly before
installing, operating, servicing or maintaining the lift.
3. Care must be taken as burns can occur from touching hot parts.
4. Do not operate equipment with a damaged cord or if the equipment has
been dropped or damaged – until it has been examined by a qualified
service person.
5. Do not let a cord hang over the edge of the table, bench, or counter or
come in contact with hot manifolds or moving fan blades.
6. If an extension cord is necessary, a cord with a current rating equal to or
more than that of the equipment should be used. Cords rated for less
current than the equipment may overheat. Care should be taken to
arrange the cord so that it will not be tripped over or pulled.
7. Always unplug equipment from electrical outlet when not in use. Never
use the cord to pull the plug from the outlet. Grasp plug and pull to
disconnect.
8. Let equipment cool completely before putting away. Loop cord loosely
around equipment when storing.
9. To reduce the risk of fire, do not operate equipment in the vicinity of open
containers of flammable liquids (gasoline).
10. Adequate ventilation should be provided when working on operating
internal combustion engines.
11. Keep hair, loose clothing, fingers, and all parts of body away from moving
parts.
12. To reduce the risk of electric shock, do not use on wet surfaces or expose
to rain.