Manualshelf

User's Manual

ManualsBrandsLAUNCH ManualsAutomotiveHeavy duty / Medium duty / Light duty Vehicle Communication Interface
71727374757677787980
LAUNCH
S3001 User Manual
67
th
rough connection to AC outlet.
5
B
attery clamps cable
To supply power to the Sensorbox
through connection to vehicle's battery.
6
E
lectronic control converting
cable 1
7
E
lectronic control converting
cable 2
9.3
Sensor Simulation
9.3
.1 Connections
1. Firstly, power the tablet on.
2. Connect the B-shaped terminal of USB cable to the B-shaped port of th
e
Sensorbox, and the other end to the USB port of the diagnostic tool.
3. Plug one end of the sensor test cable (black) into the “COM” interface of th
e
se
nsorbox, and then the other end to the test probe or electronic control
converting cable.
4. Connect one end of the sensor test cable (red) into the “VΩHz” interface o
f
th
e sensorbox, and then the other end to the test probe or electronic control