User's Manual
LAUNCH
S3001 User Manual
47
5.3.4 Launch remote diagnosis (Device-To-Device)
The S3001 handset is allowed to launch remote diagnosis with other
diagnostic tools (including but not limited to the S3001) of Launch family, which
are equipped with this module.
* Note: Before performing this operation, please make sure the following no matter
which side sends the remote request:
Turn on the vehicle power supply.
Throttle should be in a closed position.
The S3001 should be properly connected to the vehicle’s DLC and a
successful communication is required.
In Fig. 5-38, tap “Remote Diagnostic”, a pull-down menu including the following
options appears:
F
ig. 5-39
These options are defined as follows:
Actions Results
S
end remote
diagnostic reservation
T
ap it and input the reservation title or scheduled date
of the remote diagnosis, and then tap “Confirm” to
send.
R
equest control
remote device
Request to control the partner’s device remotely to
help him diagnose the vehicle.
*Notes:
Remote diagnosis has the same diagnostic steps as
manual diagnosis.
In process of remote diagnosis, tap the
b
utton to
send a voice message.
Once vehicle diagnosis is complete, a report will be










