User's Manual

LAUNCH
S3001 User Manual
25
5 Diagnosis
5.1
Intelligent Diagnosis
T
hrough simple Wi-Fi communication between the tablet and VCI device, you
can easily get the VIN (Vehicle Identification Number) information of the
currently identified vehicle. Once the VIN is successfully identified, the system
will retrieve it from the remote server and then guide you to vehicle information
page without performing the step-by-step manual menu selection.
The vehicle information page lists all historical diagnostic records of the vehicle,
which lets the technician have a total command of the vehicle faults. In addition,
a quick dial to local diagnosis and diagnostic function are also available on this
page for reducing the roundabout time and increasing productivity.
*Notes:
•
Before using this function, please make sure the VCI device is properly connected
to the vehicle’s DLC. For detailed connection, see Chapter 4.3.3.
•
A stable network connection is required for this function.
Follow the steps below to proceed.
1. Tap “Diagnose” on the Diagnostics function module and tap “AutoDetect” to
enter Fig. 5-1.
F
ig. 5-1
*Note: If the S3001 VCI device is not paired up with the tablet before doing this step, a